The National Electrical Manufacturers Association (NEMA) has published LSD 49-2010 Solid State Lighting for Incandescent Replacement—Best Practices for Dimming.
This new white paper, produced by NEMA’s Solid State Lighting Section, provides recommendations for the dimming and design of screw-based incandescent replacement solid state lighting (SSL) products. The main objective of the paper is to encourage coordination among control, power supply, and LED module manufacturers to achieve desired performance and product harmonization throughout the market. The section has also begun work on a related NEMA standard.
Because of the shared concern for high levels of performance and SSL consumer market acceptance, representatives from the U.S. Department of Energy are actively participating in NEMA’s working group devoted to this subject.
“In making these recommendations, our goal is to improve performance and to increase consumer satisfaction of SSL retrofit products in the large installed base of Edison sockets,” said Robert Hick of Leviton Manufacturing, and chair of the section. “Achieving these goals will further market acceptance of SSL products and encourage demand for new SSL product designs. Both interchangeability and harmonization tend to increase market acceptance while decreasing costs, benefiting manufacturers and consumers.”
LSD 49 may be downloaded at no charge by visiting www.nema.org/stds/lsd49.cfm.
This publication joins 37 other white papers in the NEMA LSD series, which covers a range of lighting topics. Other parts of the series cover topics such as ballast disconnects, occupancy sensors, and photoluminescent exit signage. To view a comprehensive list of NEMA LSD white papers, go to www.nema.org/stds/lsd.cfm.
NEMA is the association of electrical and medical imaging equipment manufacturers. Founded in 1926 and headquartered near Washington, D.C., its approximately 450 member companies manufacture products used in the generation, transmission and distribution, control, and end use of electricity. These products are used in utility, industrial, commercial, institutional, and residential applications. The association’s Medical Imaging & Technology Alliance (MITA) Division represents manufacturers of cutting-edge medical diagnostic imaging equipment including MRI, CT, x-ray, and ultrasound products. Worldwide sales of NEMA-scope products exceed $120 billion. In addition to its headquarters in Rosslyn, Virginia, NEMA also has offices in Beijing and Mexico City.