Home Jobs/Events/News Catalogs Manufacturers Lighting Products Newsletter Sign-Up Blogs Apps
Indoor Lighting
Outdoor Lighting
Green Lighting
Ballast/Transformers
Controls
Lamps/LED
Emergency/Exit
Buy Lighting Online
Commercial Flooring
Exterior Wall/Canopy Mount
Please check the box next to the product info you'd like to receive. When finished, fill out the contact form at the bottom of this page and hit submit. Your product information will be on the way!
Please Note: We can only process requests sent from within North America.
The Vandalex LED Cube from Legion Lighting

The Vandalex LED Cube is made for Light Emitting Diodes. A quality vandal proof luminaire engineered with high efficiency energy saving LED technology. Designed for use in residential exteriors, entryways. walkways, stairways and perimeters, parking garages and wet industrial commercial spaces. Aluminum die cast exterior with chip and fade resistant architectural bronze finish. All steel component parts are completely protected against rust and discoloration by an Anchorized Process and coated with a five stage powder coated Dura White finish for maximum durability, providing a high reflectance efficiency.

  Request more information about this product
Occusmart HF from Lamar Lighting

Building on the popularity of the Occusmart line of sensor controlled bi-level lighting, Lamar Lighting introduces Occusmart HF. Utilizing a new high frequency motion sensor which can be mounted behind the diffusers of many of Lamar’s fixtures, the sensor is virtually undetectable yet offers a coverage pattern of up to 40ft. Well suited for enclosed fixture types such as parking garage luminaires, wall sconces, recessed troffers, as well as corridor and restroom lighting. Lamar Lighting will be offering a broad variety of luminaires utilizing this new technology. Control options include bi-level or full on/off, with built in ambient light sensor to keep lamps off as needed during daylight hours.

  Request more information about this product
ZLPI Zynn Linear LED

Zynn delivers quality illumination in a small fixture. It has the versatility to be mounted on the wall or ceiling. Its standard overall projection is 4", 12", or 18", and is offered with integral or remote ballast. Zynn’s ETL damp location listing enable this low-profile fixture to adapt to many applications.

  Request more information about this product
eW Graze Powercore from Philips Color Kinetics

eW Graze Powercore linear LED lighting fixtures are ideal for surface grazing and wall-washing applications that require high-quality white light. Featuring Powercore technology, eW Graze Powercore processes power directly from line voltage, eliminating the need for external power supplies. Fixtures are available in seven color temperatures, ranging from a warm 2700 K to a cool 6500 K, including standard color temperatures of 2700 K and 4000 K. eW Graze Powercore offers superior illumination quality and dramatic energy savings for new installations and retrofit upgrades. A space-efficient, low-profile aluminum housing and flexible mounting options allow discrete placement within a wide range of compact architectural details.

  Request more information about this product
ATG eLucent WP Series LED Wall pack

eLucent WP Series LED Wall pack is designed for applications that require lighting with a long life and low maintenance requirement. With effective thermal management, corrosion-resistant, and die-cast aluminum enclosure with an architectural dark brown finish, eLucent WP Series LED Wall provides glare free, uniform illumination while providing a safe and comfortable visual experience. High lumen output, energy-efficient optical control and easy universal installation features confirm the eLucent WP Series LED Wall as the absolute choice for indoor and outdoor illumination.

  Request more information about this product
Spa from Modern Forms

ADA compliant, low profile design, Wet location lsited, Dark Sky friendly, Interior light and downlight,  BZ - Aluminum construction, with gold frosted textured glass insert, SS - 316 marine grade stainless steel construction with cool frosted textured glass insert, Dimming with electronic low voltage (ELV) dimmer, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
The Cascade from Auroralight

The Cascade is a low energy surface mounted LED wall light. The back plate is laser cut to adapt to any 3” or 4” round electrical box recessed into the wall or may be directly mounted on wall. Radial slotted mount holes allow the fixture to be rotated to level and then tightened securely in place. The mass and style of the fixture provide an optimal heat sink for the cutting-edge high brightness LED. The LED control module is sealed into the luminaire with thermally conductive epoxy and allows the fixture to operate on standard 12 volt AC systems.

  Request more information about this product
Indoor Outdoor Brick Step Lights from Nora Lighting

A new series of LED Brick Step Lights with a versatile selection of face plates and finishes is now available from Nora Lighting. The Brick Llghts are the size of a standard brick (8 5/8” x 3 15/16” x 3” deep) and can easily be installed in brick walls, patios, walkways and steps. Each Brick Light has 24 LEDs for even illumination and consumes just 4W of power for energy savings. The 120V units have an integral driver (cULus-listed) for wet-labeled applications and can be installed inside or outdoors. Architectural die-cast aluminum faceplates can be specified with louvered, lensed or shroud styling and are available in brushed nickel, bronze or white.

  Request more information about this product
Lumenfacade Horizontal from Lumenpulse

The Lumenfacade™ Horizontal is an IP66 rated luminaire for wall grazing, column lighting, and linear floodlighting. A unique design conceals the driver chamber between the luminaire and the facade, providing a slim profile and concealed mounting that blends seamlessly into the architecture. A modular and adjustable system in 1’, 2’, 3’, or 4’ sections, it is available in white (2700K, 3000K, and 4000K color temperatures) or static colors. A line voltage luminaire for 120 to 277V , it can run up to 152 feet with 1 power feed (RO version). Also available in 5W/ft versions that meet ASHRAE standards.

  Request more information about this product
Edge Security Luminaires from Cree

Edge security luminaires provide sleek and stylish security and perimeter lighting and feature a low-profile, modular design that provides clean, uniform illumination for increased visibility and a secure environment.

  Request more information about this product
The Mesa from Dreamscape Lighting

The Mesa cast brass wall sconce is designed to effectively uplight columns and arches. It may also be used to graze architectural surfaces, visually releasing their textural qualities. When installed horizontally at ground level, it becomes an excellent driveway or walkway light. The low profile of Mesa utilizes a 20 or 35 watt MR-11 lamp placed below dual honeycomb louvers. The Slim Mesa LED wall mount fixture adds an elegantly unobtrusive touch to architectural planes as it provides shielded LED down light with a 2750K, 3W LED Light Engine.

  Request more information about this product
LA0763 from ANP Lighting

This Craftsman style lantern has an Asian flare with decorative square window panels and classic trim on the hood. Pendant or chain mount is available. The fixture has a fabricated aluminum hood and body with stainless steel hardware. Horizontal lamping is available and is Dark Sky capable. High Performance LED with patented pixel design for maximum thermal management.

  Request more information about this product
SAF19 from ANP Lighting

19” flat-top Satellite Shade This modern fixture can be installed for indoor or outdoor application. UL listed. White paint comes standard on all painted fixtures and screw hardware is made of stainless steel.

  Request more information about this product
Lumenbeam Large from Lumenpulse

The Lumenbeam™ Large fixture is an IP66 rated luminaire that is perfect for all architectural flood lighting applications in both exterior and large public interior spaces. It is available with a choice of 3 different optics and various mounting options. 0-10 volt, DMX, or DALI dimming options are also available. The fixture is a line voltage luminaire ready for 120 to 277 volts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete Lumenbeam™ Large assembly.

  Request more information about this product
LED 12 inch Canopy Fixture from Neptun Light

Neptun’s 12 series canopy fixture features excellent optics for increased visibility and security with horizontal and vertical foot-candles to evenly illuminate parking garages. This fixture is on the DLC Quality Product List and will apply for most local Rebate programs. It can replace existing HID canopy or parking garage fixtures of up to 175 Watts. The LED-12 series fixtures are also available in bi-level and 0-10V full-dimming models for increased energy savings.

  Request more information about this product
Eurotique LED Series from Antique Street Lamps

Eurotique LED offers superior nighttime performance without jeopardizing the architectural integrity of your project. The thoughtfully scaled family approach to design offers you the ability to begin at the building and continue through the parking lot and into the street with continuity in your design. The multiple luminaire and arm styles along with the availability of two sizes, give you the ability to complement virtually any site plan. The LED optical system allows for tight control of light trespass and uplight, providing replicated versions of “full cutoff ” and “cut off ” effectively, ultimately providing superior energy efficiency and ambiance.

  Request more information about this product
The QPD from Precision-Paragon [P2]

The QPD LED parking garage fixture from [P2] combines next-generation LED technology with [P2]'s energy efficiency experience. With optics designed specifically for parking garage applications, the QPD is ready to replace 70-260 watt HID fixtures and offer compelling returns on investment.

  Request more information about this product
ALK 36 from Heatron

Heatron's ALK-1036 is a 36 up LED array with optics and integrated thermal management that provide OEMs with light intensity ranging from 3,800-6,400 lumens. Patterns include Type III & V.

  Request more information about this product
Echo Velocity 3.5 Exterior Pendant from SPI

Designed with the unique, asymmetric shape of the Echo Velocity family, Velocity 3.5 combines an organic form with a palette of optical options. Offering interior and exterior versions, multiple mounting options and fluorescent and ceramic metal halide lampings, Velocity 3.5 can effectively light an entire project. Velocity delivers the quality illumination and efficient light control the Echo family is known for. The most durable yet, Echo Velocity Wet Location is an IP66 rated high performance fixture. Echo Velocity combines an architecturally pleasing form with multiple optical distributions controlled with premium reflectors.

  Request more information about this product
Induction 15 inch Conical Garage Light Fixtures from Neptun Light

Neptun's 15" cone Induction canopy fixture features classic design and durability to be used in new construction or retrofit applications. The 13 series canopy fixture features excellent optics for increased visibility and security with horizontal and vertical foot-candles to evenly illuminate parking garages. The 15 series fixtures are also available in bi-level and 0-10V full-dimming systems for increased energy savings. It can replace existing HID canopy or parking garage fixtures of up to 250 Watts.

  Request more information about this product
BSJ from ASL Lighting

Alluminum Contruction. Satin Brass Finish. Frosted White Acrylic , UV stabalized, non yellowing lens.  

  Request more information about this product
The Candela from Auroralight

The Candela provides a soft glow of warm white light; when hung in tree canopies the effect is majestic. The Candela has a translucent Lexan outer diffuser that is impact resistant and completely UV stabilized to provide years of service. Precise machining coupled with careful engineering addresses thermal management requirements and ensures high performance and reliability. The Candela has an integral LED driver that allows it to operate on standard 12 volt systems with no additional hardware needed. The diffuser, LED and interchangeable optic are all field serviceable.

  Request more information about this product
ALK 24 from Heatron

Heatron's ALK-1024 is a 24 up LED array with optics and integrated thermal management that provide OEMs with light intensity ranging from 2,500-4,300 lumens. Patterns include Type III & V.

  Request more information about this product
Ara from Stile Lighting

The strength of the Ara is in the simplicity of the decorative faceplates. Eight different designs in three different sizes provide options for any space. We offer this fixture for interior and exterior applications. Fluorescent or a low-energy consumption LED light source makes this not only an interesting fixture, but also a highly efficient and cost saving option. Ara is an ADA compliant wall sconce. Choose from a palette of painted fi nishes.

  Request more information about this product
Fluorescent Wet Location Amazon WCL from ILP

The Wet Location Amazon WCL features a water clear lens for maximum light output and efficiency. 2 different enhanced reflector options can optimize the light output for either maximum fixture efficiency or maximum light spread. This makes the unit perfect for parking garages because the wide spread will boost minimums.

  Request more information about this product
ALK 48 from Heatron

Heatron's ALK-1048 is a 48 up LED array with optics and integrated thermal management that provide OEMs with light intensity ranging from 5,100-8,600 lumens. Patterns include Type III & V.

  Request more information about this product
Fluorescent Wet Location Bizzard EXT

The New Blizzard EXT offers more versatility and benefits than any other weatherproof enclosure offered. This fixture has been carefully designed with a new Rigid Mounting Beam to offer secure ceiling or dual pendant mounting options. With its patent pending Heat Management System the New Blizzard EXT can run up to 13° C cooler than the original Blizzard, finally offering an enclosed 6 lamp T5 fixture for a wide range of warehouse applications.

  Request more information about this product
Exterior Wall Pack from ASL Lighting

Exterior Wall Pack from ASL Lighting. Die cast aluminum. Mounts over electrical box. UL listed for wet location. 

  Request more information about this product
Boca 696 Ingrade LED Luminaire from Lumiere

The Boca 696 Ingrade LED Luminaire’s unique design allows the adjustable LED lamp assembly to rotate 360° and tilt vertically +/- 23° in each direction for precise uplighting, wall washing or general illumination in constricted areas. The recessed 12 watt LED source greatly reduces glare and eliminates heat from the lens making it perfectly safe for child and pedestrian areas both inside and outside. The Boca 696 luminaire is available with an integral transformer or can be utilized with a remote transformer. The compact fixture is 6-1/4" in diameter and is available in three color temperatures (3000K, 4750K and 7500K) and three beam spreads including Spot (7°), Narrow (20°) and Wide (25°) with lockable aiming. Designed for recessed mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications. Fixture is also suitable for recessed mounting in indoor or outdoor wood flooring.

  Request more information about this product
TunnelPass LED from Holophane

With over 25 years experience in tunnel lighting, Holophane now offers the most technologically advanced luminaire available for tunnel and underpass lighting for a wide variety of roadway & rail applications. The new TunnelPass LED™ provides an energy-saving and sustainable solution for applications that typically used 100-400 watt luminaires. Highly engineered for optimal thermal management and optical performance, it provides over 20 years of reliable operation with multiple lighting distributions in a platform that can withstand the demanding enviroments of tunnel lighting. The TunnelPass LED also provides the permanance of glass optics combined with the flexibility of dimming controls and multiple mounting configurations.

  Request more information about this product
The Tardo from New Star Lighting

This upscale, smart, vandal resistant fixture is 100% marine grade cast aluminum and presents a stylish option for high abuse lighting needs where the aesthetics and design is as important its durability. The face plate is also die-cast for rugged strength. This provides a design continuity for an entire project from the functional indoor fixtures to the decorative exterior wall locations without compromising strength. The Tardo is a value driven fixture that excels at New Star’s affirmation of “simple solutions for complex problems.”

  Request more information about this product
ALK Series from Heatron

Heatron's ALK Series offers OEMs 24, 36 & 48 up LED arrays with optics and integrated thermal management for light intensities ranging from 2,500-8,600 lumens. Available types III & V. (other roadway patterns available – contact factory) Applications include: street and area lighting, pedestrian and pathway lighting, parking garages, canopy lighting, commercial and industrial lighting.

  Request more information about this product
ColorFuse Powercore from Philips Color Kinetics

ColorFuse Powercore is an excellent choice for a full range of surface grazing, wall-washing, and accent lighting applications. Its ultra-compact form factor permits installation in tight spaces too small to accommodate conventional grazing fixtures that offer similar level and distribution of light. Combines professional-grade color mixing and maximized output with the efficiency and cost-effectiveness provided by Powercore technology. Delivers professional-grade illuminance with total light output of over 380 lumens per foot.  Optibin, a proprietary binning optimization process developed by Philips Color Kinetics, guarantees consistency of hue across LEDs, fixtures, and manufacturing runs.

  Request more information about this product
WP from Alumen8E

Housing: Heavy duty die cast aluminum Lens: High impact cast glass, silicone gasketing, side hinged door Finish: Post powder coat bronze Features: International Dark Sky Association approved with 90° cut-off using optional hood. Lamps included. Stainless steel hardware, optional stainless tamper-resistant hardware. Optional photocell. Medium 9”x13” or Large 9”x16” Applications: Building Surface Mount Applications

  Request more information about this product
Tsunami Wall Mount from U.S. Architectural Lighting

U.S. Architectural Lighting introduces the Tsunami Wall Mount, a graceful outdoor luminaire that can be used as either an uplight or downlight. The new Wall Mount is a companion fixture to the company’s pole-mounted Tsunami area light. The Tsunami Wall Mount has a range of light distribution patterns, including Type II, III and IV, in addition to unique wall glazing optics. The fixture is designed to illuminate building facades and to increase perimeter safety along public driveways, sidewalks and loading docks. Tsunami has a graceful, aesthetic form that becomes an integral part of a building’s exterior architecture. Its unique, wall-grazing optics are designed to produce theatrical night grazing effects and highlights around windows, cornices, reliefs, columns, moldings and surface textures. LED and HID optics are available in the downlight configuration and satisfy dark sky requirements.

  Request more information about this product
Maze from Modern Forms

Mounted vertically or horizontally, Damp location listed, Stainless Steel metalwork,  Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
LSI LED Patriot Wall Sconce

Environmentally friendly and energy efficient, LSI’s LED Patriot Wall Sconce delivers exceptional uniformity with full cutoff to create a brighter environment at lower light levels, making it ideal for entrance, egress and security lighting. This wall-mounted fixture features a one-piece, die-cast aluminum housing with sweeping curves and distinctive architectural lines to enhance any site. Built with LSI’s own SmartTec™ intelligence, the XPWS3 is virtually maintenance free and reduces energy up to 68% over HID.

  Request more information about this product
LED High and Low Bay Fixtures from Neptun Light

Neptun’s 49 series DLC approved canopy fixture features excellent optics and its rugged design allows for use in a variety of indoor and outdoor applications. With an IP 66 and 2G shock/vibration rating, this fixture is ideal for illuminating roadway tunnels, viaducts, and underpasses. The 49 series fixtures have a standard color temperature of 5000°K for greater visibility and safety. The fixtures are supplied in four different housing sizes: 28, 24, 18, and 14 inches and can replace existing HID fixtures up to 400 Watts.

  Request more information about this product
Classic Wall Mount from Teka

The Classic Wall Mount from TEKA Illumination utilizes a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp with a 12” or 15” hand spun, high purity solid copper plate shade. The fixture is constructed from copper, bronze, and stainless steel with tamper resistant, stainlesss steel hardware. 5-1/4” diameter canopy conceals mounting plate and hardware. Hand spun from high purity, solid copper plate with tamper resistant black oxide stainless steel mounting screws with a machined brass lock collar. A high temperature silicone ‘O’ Ring provides water tight seal to shade assembly.

  Request more information about this product
Teron Lighting Inc., (TLI) Releases New MINI Wall Packs

TLI has just added 2 new wall packs for outdoor dark-sky applications. Available Now! In a class of their own, these “mini” wall packs give the lighting community something that they have been requesting for a long time. “A smaller scale wall pack.” No longer does a dark-sky fixture, mounted at 12 feet, above a doorway, have to be an eyesore... TLI’s Caddy Mini and Stadler Mini are decorative but “budget friendly”, include HID or CF lamping options, and can be painted with 1 of 10 finishes (RALs available). Their small size makes them unique! Use these fixtures inverted, for indoor use...light-up the wall in an atrium or concourse.

  Request more information about this product
ATG iBright LED Street Light

Engineered for energy efficiency and environmental sustainability, iBright LED Street Light is a versatile, high-performance street lighting solution designed specifically for street and road way applications. The street Light maximizes energy savings and provides uniform and comfortable while Light. Easily retrofitted onto existing mounting systems, it's simple and affordable to invest in state-of-art technology.

  Request more information about this product
The VTG from Precision-Paragon [P2]

Designed to perform in harsh environments, the VTG is the ideal fixture for applications where cold weather and moisture are a reality.

  Request more information about this product
Beacon Wall Mount from Teka

The Beacon Wall Mount from TEKA Illumination utilizes a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp with a 12” or 15” hand spun, high purity solid copper plate shade. Top light illuminates shade while providing shielding of the lamp. The fixture is constructed from copper, bronze and stainless steel with tamper resistant black oxide stainless steel mounting screws. A 3 5/8” diameter translucent acrylic lens with clear acrylic down light lens provides a sealed optical compartment while a high temperature silicone ‘O’ Ring provides water tight seal to shade assembly.

  Request more information about this product
Full Cutoff LED Wall Pack from ILP

ILP now offers a great outdoor LED Wall Pack solution that meets dark sky requirements. The die cast aluminum housing has a hinged full cutoff front frame for easy installation and is listed for wet locations. These full cutoff, dark sky compliant units feature a forward throw optic and greatly outperform similar products on the DLC’s Qualified Products List (QPL) within the 40W range, producing 85 lm/W.

  Request more information about this product
Rain from Modern Forms

ADA compliant, low profile design, Wet location listed, Dark Sky friendly, Aluminum construction with clear seedy glass, Dimming with electronic low voltage (ELV) dimmer, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
ATG Smart X36T RGB LED Wall Washers

ATG Electronics Smart X36T RGB LED Wall Washers are the perfect solution for the dynamic illumination of facade structures and landscapes. With an IP65 rating, they are perfect for indoor and outdoor applications, capable of lighting up mansions, theaters, casinos, gardens, bridges, shopping centers, theme parks, and entertainment plazas with efficiency and stylish effect.

  Request more information about this product
304 Series Luminaires from Cree

304 Series luminaires provide exceptional performance in interior and exterior commercial industrial applications such as canopies and confined-spaces and feature advanced LED chip technology. The low-profile modular design provides a discreet appearance. Available in multiple mounting options for versatility and ease of installation. 304 Series luminaires can be configured to achieve superior target efficacy and lumen maintenance for significant reduction in energy use. An optional integrated multi-level dimming occupancy sensor allows for the ability to provide lower levels of illumination when a space is unoccupied for even greater energy savings.

• Convenient electrical compartment access from below the luminaire

• Through-wiring capability

  Request more information about this product
Hurricane Fluorescent Wall Mount from ILP

ILP’s outdoor rated HURRICANE fluorescent fixture was designed and fabricated to fit the need for an all-purpose outdoor lighting solution. The sturdy aluminum housing, tempered glass lens, and stainless steel hardware makes this fixture ideal for the most extreme wet weather applications. With its two or four foot lengths, various lamp and ballast configurations, and plentiful mounting options, the HURRICANE is the most versatile, energy efficient outdoor lighting solution on the market today.

  Request more information about this product
Lumenfacade Stand Alone from Lumenpulse

The Lumenfacade™ Stand Alone is an exterior wall grazing and wall washing luminaire. It does not require a remote power supply and adapts to any architectural geometry. The fixture enables mid-feed entry, and stem mount pendant versions for general illumination. Available in 8.5, 15.25 or ASHRAE compliant 5 watts per foot versions, it can graze 10’ to 100’ high. It is available in 3 color temperatures (2700K, 3000K, 4000K), 3 static colors, and 1’, 2’, 3’ or 4’ sections, with a choice of optics. It is a line voltage luminaire with the input ranging from 120V to 277V AC.

  Request more information about this product
Contemporary Wall Sconces from ASL Lighting

The contemporary sconces featured are available in custom sizes and colors, are all UL listed, have a 3-year quality assurance warranty, and include lamps.

  Request more information about this product
Williams Outdoor | SMRD12 | 12" Round Outdoor Ceiling Canopy Mount

Lightweight, durable ceiling mount luminaire is perfect for indoor and outdoor applications including parking garages, entrances, walkways, underpasses, and recreation areas. Features high-impact polycarbonate lens on a spun aluminum housing in various sizes. Dropped prismatic refractor produces wide, uniform lighting with greater fixture spacings.

  Request more information about this product
Lumenbeam Large Pendant from Lumenpulse

The Lumenbeam™ Large Pendant is an IP66 rated luminaire that is perfect for all architectural public spaces applications in both interior and exterior environments. It is available with a choice of various optics, stem lengths and mounting options, and a range of accessories. 0-10 volt, DMX or DALI dimming options are also available. It is a line voltage luminaire ready for 120 to 277 volts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete assembly.

  Request more information about this product
The SAF Series from Rig-A-Lite

The SAF series compact fluorescent, HID or LED fixture is used on offshore and land based drilling rigs, industrial manufacturing, waste water treatment facilities, concrete plants, tunnel lighting, food processing, refineries, chemical plants, warehouses, mining and any other area where protection is needed from liquids or gasses, dusts or fibers. It is also approved for areas where restricted breathing equipment is required. • Class I, Division 2, Group A,B,C & D • Class II, Division 1&2, Group E,F & G • Class III • Zone 2, Group IIA, IIB & IIC • AExnRII, ExnRII, T3

  Request more information about this product
Juno Lighting Group Introduces AccuLite Finia Series Outdoor LED Luminaries

Juno Lighting Group®, a subsidiary of Schneider Electric, introduces its new series of high performance AccuLite Finia Series Outdoor LED Luminaries. Featuring a unique design, these versatile and energy-efficient luminaries can be pole-mounted, wall-mounted or mounted as a flood light in commercial applications, wherever an attractive and energy efficient luminaire is needed. Each series includes a high performance configuration with maximum fixture efficacy as well as a more economical version for the budget-conscious project. The LA Series is a performance architectural LED area light designed for medium mounting heights in pedestrian scale applications, such as outdoor malls, store fronts, parks, and pedestrian areas. Custom designed, high performance molded TIR optics shape the LED light with a Wide Throw, a Forward Throw, or a round Type V distribution. The luminaires feature direct mounting to square pole for single or back-to-back installation and optional arm for fixtures mounted at 90 degrees.

  Request more information about this product
ATG eLucent CP Series LED Canopy

eLucent CP Series LED Canopy is an environmentally preferable, cost-effective, maintenance-free alternative to traditional lighting. It adopts high luminous efficacy SMD LEDs. With superior 60%+ energy savings, compared to halogen lamp or a metal halide lamp, The heavy-duty, cast aluminum, one-piece housings are polyester powder coated, protected from rust and corrosion, sealed free of dirt and bugs, and crafted with a shock proof and UV-resistant polycarbonate lens.

  Request more information about this product
Series 97 from Apogee Translite

Heavy duty extruded aluminum housing fixture. For interior/exterior decorative, cove, task lighting and accent lighting. Built for damp location or lP64 rated applications. May be furnished with various lens, saw-tooth baffles and lamps (T5 or LEDs)

  Request more information about this product
Kim Lighting’s Wall Director® LED

Kim Lighting’s Wall Director LED provides an innovative solution to the challenge of lighting ground surfaces, canopies, ceilings, and architectural features from a wall mounted luminaire. Every aspect of its form expresses the functional qualities engineered into the design. Its flowing lines extend from the wall like a sconce, while simple geometry complements the architectural surface. Combined with Kim Lighting’s exclusive MicroEmitter® LED technology, zero uplight above 90° (down position only), adjustability and invertible mounting, the Wall Director LED embodies the ultimate architectural wall luminaire. Wall Director LED comes in two sizes and is compatible with many dimming systems.

  Request more information about this product
RSCP from Alumen8E

Housing: 22GA steel. Lens: Proprietary high-performance, radial, linear clear lens, fully gasketed. Finish: Post powder coat gloss white. Features: Optional 360° motion sensor, optional daylight control photocell extends length 6”. Surface mount, chain mount or single point box. Optional vandal resistant lens retention. Applications: Parking Garage, Stairways, Canopies, Vanity, Ceilings and Walls

  Request more information about this product
Brace from Stile Lighting

Sleek and modern, the Stile brand provides the clean, appearance desired by today’s architects and designers. Brace delivers maximized light output, as well as creates an inviting and comfortable space utilizing efficient T5 and T5HOs. UL listed for wet locations, this wall-mounted fixture offers remote or integral ballasts and various shielding options. Available in two distinct looks, this sleek luminaire presents versions satisfying ADA requirements. It has the ability to add the finishing touch to modern lighting designs, interior or exterior.

  Request more information about this product
HaloMax LED Highbay Luminaire from Aleddra

Aleddra HaloMax LED Highbay luminaire features smart circuitry protection (against over-heat, over voltage, over current), advanced thermal management design through air ventilation and thermal-efficient dielectric layer, light distribution maximization through unique reflector design, and rust and corrosion-free exterior by using aeronautical-grade aluminum alloy with anodization, and IP=68 dust/water resistance, making it the ideal choice for indoor highbay and outdoor area lighting applications.

  Request more information about this product
MiniFlex from AAL

The miniFlex™, now with LED, offers new levels of illumination and visual design to wall sconces. Wet label listed and easily field configured as an uplight, downlight or uplight-downlight for interior/exterior applications.The mini-Flex is available for wall or post mount.

  Request more information about this product
Lumenpulse Launches Lumendome Product Family

Lumenpulse Inc. announces the release and availability of Lumendome, a family of direct view luminaires for creative pixel-style applications. Lumendome pixels can be used as a graphical tool, to accentuate architecture, or be integrated into building facades to create low-resolution screens for displaying branded content and imagery. The unique family of fixtures comprises 3 different sizes; the Nano, which is 2 inches (50.8 mm) in diameter, the Small, which has a diameter of 4 inches (101.6 mm), and the 6-inch (152.4 mm) Medium. Available in white (4 color temperatures; 2700K, 3000K, 3500K, and 4000K) and RGB color-changing versions, Lumendome luminaires feature a domed optic with a 240¢ª viewing angle that enables pixel formations to be perceived from any angle.

  Request more information about this product
ColorBlast Powercore from Philips Color Kinetics

ColorBlast Powercore high-performance LED fixtures combine rich, saturated, wall-washing color and color-changing effects with simplified installation. ColorBlast Powercore offers a range of beam angles for wall washing, grazing, floodlighting, and spotlighting, along with the efficiency and cost-effectiveness of Powercore technology in a rugged die-cast aluminum housing. Superior light output — Produces saturated, full-color light output of up to 1471 lumens with light projection of up to 204 feet. Fixtures are available in four beam angles: 23° and 36° for soft edges, 86° with no optic for uniformly washing façades, and a 10° beam for extended light projection.

  Request more information about this product
Lumendome Medium from Lumenpulse

The Lumendome Medium is a unique direct view luminaire that used for large scale pixel-style applications. It is a low voltage luminaire combined with a remote driver/data supply that operates with 120 to 277 volts, using only 25 watts. It offers unmatched luminance performance, enabling it to be seen at long distances. Available in 3 color temperatures (2700K, 3000K, 4000K) and static colors, with 0-10 volt, DMX, or DALI dimming options. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, a 5 year warranty is included, and covers the complete assembly.

  Request more information about this product
Sago from Auroralight

The Sago is a compact low energy LED fixture machined from solid bar stock. Interchangeable optics allows the designer to efficiently utilize light output. The Sago has an integral LED driver that allows it to operate on standard 12 volt systems. It is also engineered to IP 68 standards protecting against water intrusion. Testing at the factory virtually guarantees that the luminaire will remain protected from moisture. Each luminaire is supplied with a 15" braided stainless steel cable with a looped end for easy installation. The addition of a perforated shroud creates a dazzling sparkle on and around the luminaire.

  Request more information about this product
Polar from Modern Forms

Mounted vertically or horizontally, Damp location listed, Mitered glass construction, Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
The BVP Series from Rig-A-Lite

The BVP series brass luminaire is commonly used on offshore drilling and production rigs, waste water treatment plants, elevator pits, refineries, industrial manufacturing, food processing, government facilities, schools, hospitals and other areas where protection from gasses or salt water are needed. The BVP is available in hazardous location rated or marine only rated with incandescent or compact fluorescent lamping and with colored globes for specialty applications (not available in BVPH). • Class I, Division 2, Group A,B,C & D

  Request more information about this product
The Universe Collection from AAL

The Universe Collection® is a complete family of customizable decorative luminaries that transcend architectural styles past and present. The Universe medium scale features five luminous element options, and five hood styles. Available with IES Type 2, 3, 4 or 5 full cutoff horizontal reflector systems, IES Type 3 or Type 5 glass refractor system, or an IES Type 5 opal acrylic lens. Pole, wall and pendant mounting available. Coordinates with Universe bollard, small and large luminaires.

  Request more information about this product
MAR2 LED Series Fixture From Rig-A-Lite

Rig-A-Lite is pleased to announce our MAR2 LED Series lighting fixture. This addition to our hazardous and severe environment product offering offers a copper free extruded aluminum housing suitable for use in offshore rigs, land drilling rigs, oil and gas production, refineries, chemical plants, pharmaceutical plants, industrial manufacturing, wastewater treatment plants or other areas where hazardous gases are present. It is also rated for marine and heavy hose-down environments where salt spray and corrosive chemicals may be a factor. Available with an 80 watt LED system tested at 90.1 lumens per watt in two foot or four foot lengths; there is a configuration for your application. The superior light output will provide almost triple the output of a two lamp T-12 MAR2 and double the output of a two lamp T-8 luminaire with no maintenance for 60,000 hours. The fixtures are covered by a five year warranty against manufacturers defect and lumen loss greater than 30%. Features include non-metallic UV resistant hinges, watershed design, 360 degree rotation for unlimited mounting options, a shatter and heat resistant acrylic lens and stainless steel cam action latches.

  Request more information about this product
Classic Saturn Pendant from Teka

The Classic Saturn Pendant luminaire from TEKA Illumination matches the wall mounted version and features a 10" diameter shade hand spun from high purity, solid copper plate and utilizes a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp. Featuring a 28° swivel, hang straight, 5 ¼” diameter canopy that conceals its mounting plate. Pendant stem is machined from heavy wall ¼” OD brass; lengths 6” though 42” available. A high temperature silicone ‘O’ Ring provides a water tight seal to shade assembly.

  Request more information about this product
Guardian Series from TLI now available in LED

TLI’s popular 16” Guardian fixtures are available now in LED. 33.6 watts and over 2000 lumens. This outdoor rated LED sconce can be used to highlight an entrance to a building. Then used indoors to light the corridors. Choose from 25 different designs/patterns to dress the front of the fixture to complement a building’s esthetic appeal. TLI’s 16” Guardian LED fixture uses the latest in LED thermal protection. A surge suppression feature is also used to safeguard the components from voltages spikes. Get the look, quality, and LED innovation at a budget friendly price.

  Request more information about this product
Vogue from Modern Forms

Mounted vertically or horizontally, Damp location listed,  Mouth blown etched opal glass,  Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Forq from Modern Forms

ADA compliant, low profile design,  Wet location listed , Aluminum construction, Dimming with electronic low voltage (ELV) dimmer,  Requires Transformer to be recessed within the junction box, Replaceable LED modules, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Evo Cylinder from Gotham Lighting (Acuity Brands)

Pendant, surface and wall-mounted LED cylinders provide general illumination with superior brightness control. Wall-mounted products suitable for exterior applications. Surface and pendant-mount products suitable for covered exterior applications.

  Request more information about this product
Kim Lighting's HID to LED Upgrade Kits

Kim Lighting, the premiere manufacturer of architectural outdoor lighting, continues to expand its series of HID to LED Upgrade Kits for its most popular product lines to reduce energy consumption and allow for diming and controls, asset management or compatibility with renewable energy systems. HID to LED Upgrade Kit solution preserves the original luminaire construction attributes, maintains architectural relevance, avoids landfill dumping, and prolongs your asset value by creating the utmost in sustainability. Upgrade Kits: The Archetype, Curvilinear, Entablature, Era, Era Acorn, Era Bell, Matrix, Solitaire, Wall Director and WARP9.

  Request more information about this product
Jedi from Modern Forms

Wet location listed, Sconce light and downlight, Etched opal glass sconce with twist lock for easy removal, Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
GlasWerks LED from Holophane

GlasWerks LED has been designed to meet the aesthetic qualities desired in contemporary style, ultimately adding elegance and visibility to any outdoor setting. Available with a directional cutoff flat glass option as well as both bowl and tear drop prismatic glass, all with multiple lumen packages, distibutions and housing styles to choose from. Careful consideration has been spent on managing optical and thermal considerations for maximum performance. A highly engineered Holophane solution that fits perfectly into a variety of architectural streetscapes, the GlasWerks LED provides performance, sustainability and energy savings with durability and user-friendly utility features.

  Request more information about this product
Cooper Lighting Introduces the Lumark Crosstour LED Wall Pack Series

Cooper Lighting has introduced an internally developed wall-mount luminaire featuring the industry’s first universal “all-in-one” product design to satisfy a myriad of application needs. The Lumark Crosstour™ LED Wall Pack Series offers superior optical performance, a low-profile aesthetic design and easy installation while providing solutions for wall, surface, post (bollard), low-level and inverted installations. Designed to replace up to 175-watt metal halide fixtures with the latest energy-efficient LED technology, the Crosstour can offer up to 90% energy savings compared to equivalent metal halide wall pack products.

  Request more information about this product
Ledge from Modern Forms

ADA compliant, low profile design, Wet location listed, Aluminum construction with white mitered glass, Dimming with electronic low voltage (ELV) dimmer,  Requires Transformer to be recessed within the junction box, Transformer located in outlet box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Wet Beam 4 from Axis Lighting

• Compact profile, 3 3/8” H x 4” W

• Recessed, ceiling, wall, pendant mounting

• Fully gasketed, wet location listed

• Direct light distribution

• 1- 2 T5 or T8 lamping

• Integrated occupancy sensing controls

WET BEAM 4 is a linear luminaire specially designed – and listed for – wet locations with multiple mounting options. Suitable for exterior applications, such as soffits and canopies, and other wet environments, WET BEAM 4 also permits consistent design treatment with indoor BEAM systems. WET BEAM 4 delivers efficient direct illumination through clear, satin, or frosted lenses. IC Occupancy Sensing Controls equip a WET BEAM 4 system to reduce energy consumption still further. Fully gasketed, WET BEAM 4 can be recessed, pendant, or wall mounted, and installed in continuous runs.

  Request more information about this product
Classic Surface Mount from Teka

The Classic Surface Mount is a companion fixture and matching the contemporary styling of the Classic Saturn Wall mount from TEKA Illumination. The CFM utilizes a a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp with a hand spun, high purity solid copper 10” diameter disc. A 5” diameter machined aluminum mounting plate for installation over a 4” octagonal junction box (by others) is supplied with tamper-resistant, black oxide stainless steel mounting screws. A 3-5/8” diameter translucent acrylic lens with clear acrylic downlight lens provides sealed optical compartment while a high temperature silicone ‘O’ Ring provides water tight seal to shade assembly.

  Request more information about this product
Telluride Wall Sconce from Auroralight

The Telluride wall sconce incorporates Auroralight’s new flexible LED/Halogen hybrid technology, built around a robust thermal interface designed for high output LED modules up to 12 watts or any standard MR16 halogen lamp. Light control is excellent with a full 1” of lamp regress and two optional glare shields featuring our “Storm Drain” weep holes for uninhibited drainage with zero light trespass. High density EPDM material seals the fixture against the mounting surface for a watertight installation. The optional 120 volt power canopy option offers a solution when remote transformers are not possible. ADA compliant when remote transformer is used.

  Request more information about this product
Pedestrian Tear Drop LED from Holophane

The classic, elegant appearance and pedestrian scale of this boulevard and area lighting product is now available in LED. The new Pedestrian Tear Drop LED Series luminaires feature high performance optics for true street and walkway lighting performance, with robust construction to maximize energy efficiency and reliability. Avalable in two housing styles with four LED lumen packages and asymmetric and symmetric distributions, the Pedestrian Tear Drop LED luminaires are precisely engineered to leverage the latest COB (Chip-on-Board) LED technology, providing the best long-term value in your lighting investment when compared to alternatives in the industry.

  Request more information about this product
Teron Lighting Inc., (TLI) Now Offers More Choices When It Comes To The Wet-Rated Royal

The Royal has been the perfect solution for multifamily type projects of all kinds. This popular CF fixture now offers 5 new designs & two sizes: 13.5" H & 20" H . The Royal is surface mounted, suitable for indoor or outdoor locations, Energy Star rated, and it includes an vandal resistant polycarbonate lens. TLI also offers an integral emergency battery option by adding a back-box to the 18" or integral to the fixture in the 20". Some outdoor applications: Sconce by entrance or exit. Sconce on a porch of a condo/apartment. Around a pool area.

  Request more information about this product
eSconce from AAL

AAL’s eSconce®, now available with LED, is designed for exterior/interior environments. Available in up, down, or up + down illumination and include stainless steel and copper fascia panels. ADA compliant.

  Request more information about this product
WF527 from ANP Lighting

27” Deep Bowl Warehouse shade with 40w max LED capability This urban, industrial fixture can be installed for indoor or outdoor application and has many accessory options available. UL listed. White paint comes standard on all painted fixtures and screw hardware is made of stainless steel.

  Request more information about this product
Dawn from Modern Forms

Wet location listed, Back light and down light, Aluminum construction, Dimming with electronic low voltage (ELV) dimmer, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Olympus Series Solid State BKSSL

The Olympus Series™ is a beautiful wall-mounted architectural lighting fixture that now incorporates our Power of ‘X’ technology to offer a higher lumen package while maintaining ‘lifetime’ color consistency. This ADA compliant fixture is constructed of machined aluminum components with stainless steel hardware and protected with a Class ‘A’ powder coat finish. Now with dimming driver options for use with standard incandescent dimmers.

  Request more information about this product
Lumark Wal-Pak LED Series

Lumark’s Wal-Pak LED Series of wall luminaires provides traditional architectural style with high performance energy-efficient illumination. Wal-Pak’s rugged die-cast aluminum construction, hinged removable door, stainless steel hardware and IP65 rating makes it an ideal solution for pathway illumination, building entrances, vehicle ramps, schools, stairways and loading docks. The patent pending Wal-Pak LED luminaires are available in 20W or 40W LED energy-efficient configurations offering 50,000 hours of maintenance-free life with up to 90% overall energy and maintenance savings.

  Request more information about this product
Kentia from Auroralight

The Kentia is a compact low energy LED fixture machined from solid bar stock. Interchangeable optics allows the designer to efficiently utilize light output. The Kentia has an integral LED driver that allows it to operate on standard 12 volt systems. It is also engineered to IP 68 standards protecting against water intrusion. Testing at the factory virtually guarantees that the luminaire will remain protected from moisture. Each luminaire is supplied with a 15" braided stainless steel cable with a looped end for easy installation. The addition of a perforated shroud creates a dazzling sparkle on and around the luminaire.

  Request more information about this product
Neo from Modern Forms

Mounted verically or horizontally, Innovative edge lit screen technology, ADA compliant, low profile design, Damp location listed, Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Tube from Modern Forms

Wet location listed, Dark Sky friendly, Aluminum construction with etched glass, Dimming with electronic low voltage (ELV) dimmer, Integral transformer in luminaire, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
ATG Smart XLT RGB LED Wall Washers

ATG Electronics Smart XLT RGB LED Wall Washer is the linear and weatherproof (IP65) member of Smart Wall Washer family. From facade structures to landscapes, the Smart XLT generates great dynamic washing effect. Smart XLT comes with two control methods: self-control and DMX control. Under self-control, it follows pre-programmed lighting effects.

  Request more information about this product
WD530 from ANP Lighting

30” Deep Bowl Warehouse shade with 40w max LED capability Can be installed for indoor or outdoor application and has many accessory options available. UL listed. White paint comes standard on all painted fixtures and screw hardware is made of stainless steel.

  Request more information about this product
Echo Effect Step / Recessed Wall

The Echo Exterior Recessed Wall and Step light is a fully recessed, IP67 Rated rectilinear fixture. A reflector is designed using premium materials to direct the light down the wall or to highlight stairs for increased safety, and to minimize glare from the fixture. Aluminum faceplate options and tempered glass show off the quality and how rugged this fixture really is. Various outputs, sizes and mounting orientations allow maximum flexibility in your design.

  Request more information about this product
C03 from US Energy Sciences

Canopy with aluminum housing, hinged top frame, safety cable restraint, and white powdercoat finish over a chromate conversion coating. White powdercoat steel reflector, molded prismatic borosilicate glass lens. Cast in template for mounting directly over a 4" recessed outlet box. Optional trim ring available.

  Request more information about this product
Series 77 from Apogee Translite

Weather tight, extruded aluminum housing for surface or pendant mounting. Extruded self hinging wrap around lexan lens. Suitable for wet location. Available with LED and flourescent lamps.

  Request more information about this product
Mia from Nora Lighting

Mia, a wet-labeled collection of architectural die-cast aluminum LED mini step lights, is now available from Nora Lighting. The recessed, low profile 3W fixtures are designed for use on patios or decks and along interior stairways in hotels, hospitals, schools and other public or residential sites. Mia face plates are offered in a range of styles and finishes, including louvered, lensed or shroud in brushed nickel, bronze or white. All models are constructed from die-cast aluminum and are cULus listed for wet locations. They can be mounted horizontally or vertically. The solid state step lights include an integrated driver and 12 LEDs per unit with 3000K. They are rated for 50,000 hours of performance. Red or amber LEDs are also available, along with color-matching finish screws.

  Request more information about this product
Vetri from Modern Forms

Mounted vertically or horizontally, Damp location listed, Piastra hand made glass, Dimming with electronic low voltage (ELV) dimmer, Transformer located in outlet box, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K,  CRI: 85

  Request more information about this product
Orbit Industries/UMI Introduces HID Wall Sconces for Commercial Use

Orbit Industries/UMI has released a new series of HID (high intensity discharge) fixtures designed for safety and security in public areas. Featured in the new product line are contemporary crescent-shaped wall scones for commercial and retail centers. Model HWP11 Down Light and HWP11U Up and Down Light offer the benefits of industrial-grade wallpacks with sleek, modern designs. The new HID fixtures are constructed from heavy-duty cast aluminum housings and have tempered clear glass lenses that are heat, shock and impact-resistant. Finishes are available in bronze, black and white. Both models include lamps and a half-inch NPS tapped back and two sides for conduit entrances.

  Request more information about this product
Intense Lighting Announces The Addition Of The IVR2-RPS To Its Popular V-Rail Product Line

Intense Lighting, Inc., an industry leader in high-quality, specification-grade lighting products, is proud to introduce the addition of the IVR2- RPS to its V-Rail product line. This second generation, solid state luminaire utilizes a remote 24V Class 2 power supply and offers a sleek, minimalistic, architectural design. Like the IVR2, both products are uniquely designed to illuminate stairways, ramps and paths. V-Rail provides enough light to meet the minimum illumination of 10 fc (108 lux) as measured on the walking surface, and as mandated by the NFPA 101 Life Safety Code. V-Rail is an extremely energy efficient product and offers the highest lumens per watt in the industry. Compared to the competition, V-Rail consumes 45% less energy and delivers more than double the average foot candles.

  Request more information about this product
Denali Surface Downlight Solid State BKSSL

Does your next project call for a fixture that truly makes a statement? Look no further than the Denali Surface Downlight™. This architectural surface mounted product, incorporating power of ‘X’ BKSSL™ technology, is designed to effectively illuminate a vast array of exterior and interior spaces. Select from three cap styles for complete lighting control. Now with dimming driver options for use with standard incandescent dimmers.

  Request more information about this product
Wet Location Amazon LED from ILP

The Amazon LED wet location fixtures give optimal performance and longevity with a host of features that set it apart from standard vapor tights. Starting with a fiberglass housing with a continuous poured, closed cell gasket to the U.V. stabilized polycarbonate lens, the Amazon LED can survive in wet and dusty locations. With an overall height just over 4 inches, the Amazon LED can be mounted flush to your ceiling or by a pendent. The Amazon LED also comes standard with stainless steel mounting clips so the fixture can be mounted without drilling into the body.

  Request more information about this product
Kim Lighting’s PGL7 LED

Kim Lighting invented the parking structure luminaire category, and once again is revolutionizing the industry with PGL7 LED. PGL7 LED, a low profile luminaire designed to employ Kim Lighting’s exclusive MicroEmitter® LED technology, the latest solid-state lighting performance package. PGL7 LED luminaires achieves >50 LPW, required by most Utility rebate incentive programs, is a perfect fit for new and facility upgrade projects. The flexibility of Kim Lighting’s exclusive MicroEmitter® LED technology provides designers with a full palette of wide and narrow distribution patterns, expanding application possibilities to include covered canopies and walkways, loading docks and public transportation platforms.

  Request more information about this product
LS-EX Series from ELP

The small LED low level steplights with integral driver for exterior or concrete pour installations. The shallow 3” depth allows the fixture to be easily incorporated into the wall. Designed with a totally indirect light source and small aperture, it provides soft light with minimal brightness. The luminaire efficacy is 25 lumens/watt. The 2 or 4 watt fixtures have a formed diffuse silver reflector of high purity aluminum (99.9%) with a 97% reflectance. The indirect design provides a soft asymmetric wash of light on the walkway.

  Request more information about this product
15" Rectangular Step Light with Angled, Flat, or Louvered Shield from H.E. Williams

Simplicity best describes this back-to-basic step light. No bells or whistles, just a soft glow to illuminate stairways, entrances or walking paths. Clear or frosted tempered glass is set in our solid cast aluminum housing for a sturdy weathertight fixture.

  Request more information about this product
Beacon Stem Mount from Teka

The Beacon Stem Mount pendant luminaire from TEKA Illumination matches the wall mounted version and features a 12", 15", or 24" diameter shade hand spun from high purity, solid copper plate and utilizes a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp. Featuring a 28° swivel, hang straight, 5 ¼” diameter canopy that conceals its mounting plate. Pendant stem is machined from heavy wall ¼” OD brass; lengths 6” though 42” available. A high temperature silicone ‘O’ Ring provides a water tight seal to shade assembly.

  Request more information about this product
CF from Alumen8E

Housing: 22GA steel Lens: Acrylic or polycarbonate clear prismatic Finish: Post powder coat gloss white Features: Tamper resistant hardware. Optional adapter plate for 3/0 or 4/0 box; optional raised housing for conduit access adds 1.5” to height. Lamps included. LED version: 5yr warranty, Nichia® LEDs, 60,000hr life. Applications: Ceilings, Canopies, Retrofit Over Existing Inefficient Recessed Lights, Schools, Shopping Centers

  Request more information about this product
Pla from Visa Lighting

• 5 year product warranty • 32 standard paint finish options • Light engine is IP65 rated for dust and water resistance • Low energy, long life LED source with integral power supply • Single Color LEDs (Cool, Neutral or Warm White with 30° or 50° optional beam spread or Amber, Blue, Green, Neutral White or Red pencil beam) • Luminous models have a clear high impact grade acrylic shroud, inner cylinder is frosted acrylic • Uplight and downlight configurations are separately specifiable • Bracket mounting system facilitates easy installation and maintenance • Modular design allows for easy field exchange or replacement of reflector optics to facilitate modification of beam spreads • ETL listed to UL standards (US and Canada) for wet location mounting 4' above grade

  Request more information about this product
XWA from Alumen8E

Housing: .060 aluminum, wall mounted with fully adjustable brackets Lens: Tempered glass, sealed and gasketed door frame Finish: Post powder coat bronze Features: Up to 75% energy savings over comparable HID luminaires. International Dark Sky Association approved with 90° cut-off. Enhanced cold weather performance using T5HO amalgam technology, -20° starting temp. Ultra-thin aerodynamic profile to minimize wind loading. Applications: Building Surface Mount Applications

  Request more information about this product
Screen Wall Mount from Teka

The Screen Wall Mount from TEKA Illumination is an elegant stem mounted wall luminaire constructed from copper, bronze, and stainless steel utilizing a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp. A 5 1/4” diameter canopy hand spun from high purity solid copper plate installs over a 4” octagonal junction box (by others) and supplied with tamper-resistant, black oxide stainless steel mounting screws. Features a mesh light diffusing screen with matching finish.

  Request more information about this product
All Weather Fixtures from ASL Lighting

Form follows function in these European-style luminescent opal white and prismatic basics that are snap-tight, UL wet-location listed, moisture and bug-proof, and virtually non-corrosive.

  Request more information about this product
The SXP Series from Rig-A-Lite

The SXP series HID and compact fluorescent fixture is commonly used on offshore rigs, land rigs, in refineries, chemical plants, waste water treatment facilities, paint booths and any other area where protection is needed from explosive gasses, dusts and fibers. It is also approved for use in areas where salt water spray and chemicals may be a factor and can be installed as a floodlight. • Class I, Division 1, Group C & D • Nema 4, 4X • Zone 1, Group IIA & IIB

  Request more information about this product
Lumenbeam Medium Pendant from Lumenpulse

The Lumenbeam™ Medium Pendant is an IP66 rated luminaire that is perfect for all architectural public spaces applications in interior and exterior environments. It is available with various optics, stem lengths and mounting options, and a range of accessories. 0-10 volt, DMX or DALI dimming options are also available. It is a line voltage luminaire ready for 120 to 277 volts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete assembly.

  Request more information about this product
XPG3 LED Parking Garage Fixture from LSI Industries

LSI Industries has introduced the XPG3 LED Parking Garage Fixture. The XPG3 is a state-of-the-art LED solution designed to provide the perfect light for your enclosed or non-enclosed parking structures for both retrofit or new construction. Utilizing LSI’s proprietary SmartTec™ control technology, this fixture provides several energy saving features as well as product life improvement through automatic thermal control.

  Request more information about this product
The TMD Series from Precision-Paragon [P2]

It’s time to relegate traditional loading dock lights to the past. Our TMD Series of LED Loading Dock lights combine the advantages of LED lighting technology with Precision-Paragon’s reputation for quality, performance, and thermal management.

  Request more information about this product
The Steplights Collection from AAL

The Steplights collection brings you a full palette of designs with exceptional lighting performance. Choose from 2 shapes, 2 materials, 2 sizes, 3 fascia designs, and 3 mounting options to best suit your applications. AAL’s small Steplights are now available with a 5-watt energy-efficient and long life LED system.

  Request more information about this product
Lumenbeam Medium from Lumenpulse

The Lumenbeam™ Medium fixture is an IP66 rated luminaire that is perfect for all architectural flood lighting applications in both exterior and large public interior spaces. It is available with a choice of 3 optics and various mounting options. 0-10 volt, DMX or DALI dimming options are also available. The fixture is a line voltage luminaire, ready for 120 to 277 volts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete Lumenbeam™ Medium assembly.

  Request more information about this product
The FPF Series from Rig-A-Lite

The FPF series fluorescent fixture is UL listed for wet and damp environments. It is also NSF certified food equipment and rated for high-pressure hose down environments. This luminaire was created in the early 1990’s in collaboration with food processors and specifying engineers and is still the standard in inspection area lighting for meat, poultry, fruits, vegetables, and further processed foods. It has also been recently updated to assure optimal photometric performance and energy savings. The non-metallic housing is a true water shed design. All external hardware is stainless steel with either plastic or stainless steel end caps available.

  Request more information about this product
Denali Series PM2D Solid State BKSSL

The Denali Series™ floodlight is a powerful, innovative solid-state lighting fixture designed to deliver higher lumen output and unprecedented color consistency. Incorporating power of ‘X’ BKSSL™ technology utilizing Patented “Color Corrected Cold Phosphor”, Denali delivers near-perfect natural white light while maintaining ‘lifetime’ color consistency. Now with dimming driver options for use with standard incandescent dimmers. Universal PM2D design accommodates twin low voltage fixtures and permits water-tight installation.

  Request more information about this product
Vandal Resistant Fixtures from ASL Lighting

These robust fixtures are designed for use in vandal-prone areas, and are manufactured using specialty extrusions that are designed to withstand abusive environments.

  Request more information about this product
IVPG from Alumen8E

Housing: Rigid external fiberglass housing with internal 22GA steel strip fixture. Lens: High-impact resistant acrylic lens, gasketed with continuous seal. Finish: White painted exterior housing, baked white enamel internal strip fixture. Features: Optional 360° motion sensor, optional daylight control photocell. Lens is securely locked in place with retaining latch for tight seal. Acrylic lens features internal crepe pattern and smooth exterior for ease of cleaning. Optional stainless steel and vandal-resistant mounting brackets and latches. Standard industrial style reflector. Applications: Stairways, Canopies, Ceilings and Walls requiring Wet Location

  Request more information about this product
LA6643 from ANP Lighting

A beautifully constructed lantern with old world charm is a pendant/chain hung fixture. The detailed side bars taper slightly to a banded base. The pendant luminaire has full cast aluminum construction with a decorative hinged and gasketed hood that has tool-less entry for easy access to the lamp. Horizontal lamp placement is available and is Dark Sky capable. This fixture pairs with a post mount version, LA6641, and a wall mount version, LA6642, for a variety of applications.

  Request more information about this product
Ginty LED from TLI

An attractive outdoor lighting fixture, the Ginty LED has a teardrop shape and offers a fabulous budget-friendly solution to lighting spaces from damp location balconies to indoor storage rooms. Ginty LEDs contain a white polycarbonate housing with a frosted white polycarbonate lens and ambient operating temperature range of -40° C (-40° F) to 40° C (105° F). The thermal protected LED array has an estimated 50,000 hours of life (L70) and constant current at 70 milliamps.

  Request more information about this product
Edge Parking Structure Lighting from Cree

Edge parking structure luminaires are designed with BetaLED technology inside providing advanced light uniformity for parking garages, underpasses and other confined-space applications. Edge luminaires feature an optional multi-level sensor that can contribute to an excess of 80 percent energy savings compared to best-in-class traditional technologies. Edge parking structure luminaires are a versatile lighting solution for high performance in exterior and interior applications. Also available are Edge surface mount canopy luminaires for exterior canopy commercial applications.

• Low-profile modular design

• Optional integrated occupancy sensor for additional energy savings

• Compatible with a variety of networked-based controls systems

  Request more information about this product
Catskill Series Solid State BKSSL

The Catskill Series™ is designed for architectural up lighting or down lighting applications. With a projection of only four inches, the Catskill Series™ meets the ADA requirements for Architectural Surface lighting. The addition of our ‘X’ technology makes this fixture a stylish and smart addition to any indoor or outdoor application. Now with dimming driver options for use with standard incandescent dimmers.

  Request more information about this product
The Vertex from Auroralight

The Vertex is a low energy recessed mount LED step light. Machining allows for the faceplate and light engine to be level even if the back box is installed up to 1/2” out of plumb. The high density EPDM rubber gasket ensures internal components are protected from moisture and prevents unwanted stray light. Machined grill and design provide the ideal heat sink for up to 5 watts of LEDs. The LED control module allows the fixture to operate on standard 12 volt systems. Intended for exterior concrete pour, brick and block installations. Available with brass, copper or stainless steel trim.

  Request more information about this product
WallPack LED from Holophane

Powered by advanced LEDs, the Wallpack LED luminaires deliver maintenance-free illumination for more than 15 years, eliminating frequent lamp changes while producing well-lit sites that are reliably illuminated. The Wallpack LED features a choice of borosilicate glass or polycarbonate refractors for precise illumination. All housings are die cast aluminum for corrosion resistance. The Wallpack LED is available in 3 lumen packages to replace up to 400 watt HID luminaires with energy savings up to 77% over traditional HID alternatives. This versatile Wallpack is the answer to all of your perimeter, security and roadway underpass needs.

  Request more information about this product
The GR/GS Series from Lamar Lighting

LaMar Lighting's newest application for the popular Occu-Smart® line of motion sensor controlled lighting is parking garages. The GR/GS series feature cast aluminum housings, tough polycarbonate diffusers, and the Occu-Smart HF high frequency motion sensors, capable of detection through the diffusers with no exposed components. In bi-level or full on/off options, saving energy in parking garages just got a little "smarter".

  Request more information about this product
New energy efficient LEDme Line Voltage Step and Wall Lights from WAC Lighting

Designed with architectural aesthetics and performance in mind, WAC Lighting’s new energy efficient LEDme™ Line Voltage Step and Wall Lights offer a sleek profile and enhanced functionality for safety and style on indoor/outdoor stairs, walls and pathways. Versatile, horizontal and circular scoop designs offer clean, seamless installation without visible hardware. Easy to retrofit, all are direct wired without a driver or transformer, with a wide beam angle for broad consistent, shadow- and glare-free lighting. Cast aluminum luminaires dim with ELV dimmer. Equipped with replaceable LED module. Minimize energy consumption and maintenance costs. Faceplates in White, Bronze and Brushed Nickel finishes. IP66 rated. Five-year product warranty.

  Request more information about this product
Flexible LED docklite® from Phoenix Provides Light Comparable to 150W PAR38

Lamp The Phoenix FLEX LED docklite® provides light comparable to an incandescent dock light, with a 150W PAR38 lamp, while using only 16 watts and saving 84% of the energy. The FLEX LED is designed for the general illumination of a truck trailer. When impact does occur, the flexible arm and hinged bracket allow the fixture to swing easily out of the way. With no filament to break, the solid state light source readily withstands impact. Designed for durability and with LEDs rated for 50,000 hours, the fixture dramatically reduces maintenance.

  Request more information about this product
LE300 High Performance LED Lighting Solution from LDPI, Inc.

LDPI, Inc. introduces its high-performance LED lighting solution – LE300. This fixture is available in three wattages, and is UL listed for wet locations and marine outdoor locations, IP66 and NEMA 4X rated, as well as Dark Sky Compliant. The 110 watt version is tested at 40° C ambient temperature, while the 80W and 50W are tested at 50° C ambient temperature. Available in pendant, ceiling, stanchion as well as yoke mounting, this versatile unit is designed for multipurpose use in many exterior applications.

  Request more information about this product
Philips Sportlite Introduces the LED Garage Fixture Series

Philips Sportlite introduces the LED Garage Fixture Series, specifically designed to provide more efficient lighting at an economical price. The fixtures maintain more than 70% of their lumens up to 82,000 hours, providing less need for maintenance or replacement. Sportlite’s LED Garage Fixture Series features the GR-52, which has specifically designed optics to provide a very accurate type “V” square lighting pattern. This design maximizes light output and offers a high lumen to watt ratio. Offered in two models, the GR-52 is available in either 60 or 63 watts at full power, with a color-rendering index of 74 and a lumen per watt ratio of 87.

  Request more information about this product
2ft Amazon LED Parking Garage from ILP

The 2ft Amazon Parking Garage fixture gives optimal performance and longevity with a host of features that set it apart from other LED vapor tights. Starting with a fiberglass housing with a continuous poured, closed cell gasket to the impact resistant linear ribbed frosted lens, the Amazon Parking Garage can survive in any wet and dusty locations. This fixture has been carefully designed with a new enhanced reflector to meet distribution requirements for the DLC’s parking garage category.

  Request more information about this product
SXPJ Series from Rig A Lite

Rig-A-Lite is pleased to announce our SXPJ series of lighting fixtures. This addition to our hazardous and severe environment product offering offers a copper free cast aluminum housing suitable for use in offshore rigs, land drilling rigs, oil and gas production, refineries, chemical plants, pharmaceutical plants, industrial manufacturing, wastewater treatment plants or other areas where hazardous gases, dusts and fibers are present. It is also rated for marine and heavy hose-down environments where salt spray and corrosive chemicals may be a factor. Available with 100 watt LED or up to 84 watt CFL lamping in multiple wattages, external stainless steel hardware and a heat & impact resistant prismatic glass globe; there is a configuration for your application.

  Request more information about this product
Juno Lighting Group Expands Juno Step Light Portfolio with New Mini LED Step Lights

Juno Lighting Group®, a subsidiary of Schneider Electric, introduces ultra versatile, energy efficient Juno LED Mini Step Lights for indoor or outdoor wall mount applications. Designed for a range of residential, commercial, and theatrical applications, the Juno LED Mini Step Lights are modular and high performance. Environmentally friendly and energy efficient, Juno Mini LED Step Lights do not contain any lead, mercury or harmful ultraviolet or infrared wavelengths. The IC-rated Mini LED Step Lights consume merely 2.6 watts and are available with four distinct optics that each provide a unique light distribution pattern. When used with Juno qualified 120V electronic low voltage dimmers, the LED Driver has a 100% to 20% or better dimming range and can accommodate an input voltage of 120 VAC at 60Hz.

  Request more information about this product
Rubix from Modern Forms

Wet location listed, Uplight and downlight, Aluminum construction with etched glass, Dimming with electronic low voltage (ELV) dimmer, Integral transformer in luminaire, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Spire from Modern Forms

ADA compliant, low profile design, Wet location listed, Aluminum construction with bent white glass, Dimming with electronic low voltage (ELV) dimmer, Integral transformer in luminaires, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Mini Drivestar Surface Mount from BK Lighting

Mini Drivestar(TM) Surface Mount features a 2" diameter faceplate machined from solid, copper-free aluminum, brass or stainless steel. With only a 5/8" reveal above grade, Mini Drivestar(TM)  Surface Mount has unlimited design possibilities. It features our exclusive side-emitting LED source with an integral driver.  BKSSL(TM) technology provides long life, significant energy reduction  and exceptional thermal management.

  Request more information about this product
Kim Lighting’s Era® LED Family

Kim Lighting brings LED to its Era series of performance luminaires, expanding them featuring exclusive MicroEmitter LED technology. The Era® LED series includes: Era® Acorn LED, Era® Bell LED and Era® Lantern LED is conceived as a total integration of design and technology. This family of luminaires is a direct response to the needs of today, engineered with tomorrow’s insight. The Era product line is designed to surpass tough demands, such as energy efficiency, glare control, light trespass, aesthetic and structural integrity, all manufactured to Kim’s standards for quality, longevity, and performance.

  Request more information about this product
Cooper Lighting Introduces The Next Generation LED LightBAR System

Cooper Lighting, an industry leader committed to delivering innovative products and driving transformational technology in the lighting industry, has announced it has upgraded its outdoor LED LightBAR™ technology. Internally developed at Cooper Lighting’s accredited state-of-the-art LED Innovation Center and integrated in multiple product lines, the new system’s unmatched optical performance delivers improved lumen output and efficiency, while continuing to offer up to 75% in energy savings over traditional High Intensity Discharge (H.I.D.) outdoor lighting sources.

  Request more information about this product
Echo Effect Recessed Ceiling from SPI

The Echo Exterior Recessed Ceiling fixture is a fully recessed, IP67 Rated rectilinear fixture for ceiling mount, wall wash applications. A refl ector is designed using premium materials to direct the light down the wall, and minimize glare from behind the fixture, getting the light where is it intended. Aluminum faceplate options and tempered glass show off the quality and how rugged this fixture really is. Various outputs, sizes and mounting orientations allow maximum flexibility in your design.

  Request more information about this product
Lumenfacade from Lumenpulse

Lumenfacade™ is used for wall grazing, column lighting, and linear floodlighting. A modular, adjustable IP66 rated system, it comes in 1’, 2’, 3’, or 4’ sections enabling ease of installation for linear and radial configurations. It is available in 2700K, 3000K, and 4000K color temperatures, with a choice of optics. A line voltage luminaire for 120 to 277 V, it uses 8.5 or 15.25 watts per foot. A 5W/ft ASHRAE compliant version is also available. Designed to promote sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, a 5 year warranty covers the complete assembly.

  Request more information about this product
SFWZ Zynn Linear Fluorescent from Stile Lighting

Zynn delivers quality illumination in a small fi xture. It has the versatility to be mounted on the wall or ceiling. Its standard overall projection is 4", 12", or 18", and is offered with remote ballast. Zynn’s ETL damp location listing enable this lowprofile fixture to adapt to many applications.

  Request more information about this product
Lumenbeam Medium RGB from Lumenpulse

The Lumenbeam™ Medium RGB is an IP66 rated luminaire that is perfect for all color changing architectural flood lighting applications in exterior and large public interior spaces. It is available with a choice of 3 different optics and various mounting options. DMX 512 ready, the Lumenbeam™ Medium RGB is a line voltage luminaire for 120 to 277 volts, using only 28 watts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete Lumenbeam™ Medium RGB assembly.

  Request more information about this product
The Telluride from Auroralight

The Telluride wall sconce incorporates Auroralight’s new flexible LED/Halogen hybrid technology, built around a robust thermal interface designed for high output LED modules up to 12 watts or any standard MR16 halogen lamp. Light control is excellent with a full 1” of lamp regress and two optional glare shields featuring our “Storm Drain” weep holes for uninhibited drainage with zero light trespass. High density EPDM material seals the fixture against the mounting surface for a watertight installation. The optional 120 volt power canopy option offers a solution when remote transformers are not possible. ADA compliant when remote transformer is used.

  Request more information about this product
The Venere Traditional from AAL

The Venere® Traditional is a stylish wall sconce designed to be used to accentuate doorways and building entrances while providing egress illumination during a power failure. Available in small and large size with six optical configurations. The fixture can be configued as an uplight, downlight or uplight/downlight. Full cutoff options available. Available with a wide variety of decorative fascia options, including custom. Also available in a contemporary style.

  Request more information about this product
Bow from Stile Lighting

Sleek and modern, the Stile brand provides the clean, minimal appearance desired by today’s architects and designers. ADA compliant, this UL damp location fixture mounts discreetly to either stubbed conduit or factory-supplied anchors and offers remote ballasts and various shielding options. This luminaire’s clean appearance and minimal wall bracketry provide the illumination needed in a stylish low-profi le fixture. Bow delivers quality illumination with long-lasting efficient T5 and T5HOs. The fixture is also available with LEDs.

  Request more information about this product
XPA from Alumen8E

Housing: .060 aluminum, pole mounted Lens: Tempered glass, sealed and gasketed door frame Finish: Post powder coat bronze Features: Up to 75% energy savings over comparable HID luminaires. International Dark Sky Association approved with 90° cut-off. Universal mounting system for any configuration, tilts in 5° increments 0°-180°. Enhanced cold weather performance using T5HO amalgam technology, -20° starting temp. Ultra-thin aerodynamic profile to minimize wind loading, tested to 150mph. Applications: Parking Lots, Walkways, Roadway, Car Dealerships

  Request more information about this product
BRANDI from Birchwood Lighting

BRANDI is designed for architectural applications which demand a performance-driven Wet-Location luminaire that can keep the toughest elements out, but hold the most sophisticated style in. BRANDI’s 2 1⁄2” mounting profile and concealed weather-sealing comprise a luminaire designed to withstand wet outdoor conditions while still blending into the surrounding architecture with ease. Various mounting orientations make installations in hard-to-reach areas less harrowing and allow light delivered almost anywhere: outdoor entrances, under walkways, pergolas or within structural eaves. 18 gauge steel housing, machined end caps, extruded acrylic or polycarbonate lenses and interior gaskets m¬ake BRANDI the perfect choice under the most demanding weather conditions.

  Request more information about this product
Low Profile LED Canopy from ILP

Built with a Heavy-Duty cast aluminum one-piece housing, these high quality Low Profile LED Canopies are your number one choice where outdoor LED garage lights are needed. ILP’s Low Profile LED Canopy was specifically designed with a precision designed optic to meet DLC approval in the parking garage category.

  Request more information about this product
ColorGraze Powercore from Philips Color Kinetics

ColorGraze Powercore linear LED lighting fixtures are optimized for surface grazing, wall-wash lighting, and efficient signage illumination. Superior light quality offers uniform beam saturation as close as 6 in (152 mm). A compact, low-profile design combined with flexible mounting options allows for discreet placement within a wide range of architectural features. Available in three standard lengths, with standard 10º x 60º and 30º x 60º beam angles. Individually addressable 1 ft (305 mm) segments accommodate fine control of color-changing effects and pre-programmed light shows.

  Request more information about this product
DLA 16W LED Dock Light from Phoenix Products Company, Inc.

Phoenix Products Company, Inc. is proud to announce the launch of the DLA 16W LED docklite ®. The fixture is designed for years of service, with a corrosion-resistant, low-copper content aluminum housing. The DLA delivers 789 lumens in a 22 degree beam, easily illuminating the length of a semi-trailer. Using only 16 watts, it provides an 89% energy savings compared to a 150W incandescent dock light and is significantly cooler to the touch. Designed to easily retrofit to nearly all dock light arms, this fixture is easy to install and requires virtually no maintenance.

  Request more information about this product
The Architectural Emergency Light Series 2 from Sure Lites

Designed and engineered with style in mind, the Architectural Emergency Light Series 2 (AEL2) features an advanced optical design in conjunction with energy efficient, long-lasting LEDs, providing maximum path of egress lighting performance. The AEL2 is manufactured with an “always on” circuit feature. The AEL2 has the capability to be connected to a switched or un-switched circuit that is used to power the architectural lighting. Therefore, the AEL2 can be used as both an architectural light and as an emergency egress light. The fixture’s architectural sconce shape blends effectively in all decorative interiors and exteriors to provide an attractive alternative to standard emergency lighting fixtures. The AEL2 is designed to compliment both indoor and outdoor architectural lighting schemes by offering both a 3100K and 4600K lumen output option. Constructed of a die-cast aluminum housing with an integral refractive polycarbonate faceted lens, the new AEL2 is UL listed for temperatures between -20°C to 40°C (-4°F and 104°F) and is wet listed for outdoor applications.

  Request more information about this product
CGT from ASL Lighting

Die cast aluminum. Mounts over electrical box. UL listed for wet location.

  Request more information about this product
Deco from Modern Forms

Wet location listed, Aluminum construction, Clear mouth blown outer glass and etched opal interior sconce, Integral transformer in canopy, Dimming with electronic low voltage (ELV) dimmer,  Requires Transformer to be recessed within the junction box, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
LED Wall Pack Flood Fixtures from Neptun Light

Neptun’s 14" LED Flood Type Wall Pack fixtures feature classic form and durability to make it an excellent choice for new construction or retrofit applications. Neptun's LED Wall Pack fixtures feature a bright white 5000°K color temperature for increased safety and security. It can replace existing HID fixtures of up to 150 Watts. This fixture is DLC listed and qualifies for most local Rebate programs.

  Request more information about this product
Lumenfacade Remote from Lumenpulse

The Lumenfacade™ Remote is an IP66 rated wall grazing and wall washing luminaire. Low voltage, with a 24 volt input, it has a remote power supply that makes the fixture profile slim, and enables it adapt to any architectural geometry, including tight spaces. Available either in 8.5, 15.25 or ASHRAE compliant 5 watts per foot versions, it can graze 10’ to 100’ high. It is available in 3 color temperatures (2700K, 3000K, 4000K), static colors, and 1’, 2’, 3’ or 4’ sections, with a choice of optics. Comes with a swiveling bracket for a 0°-180° tilt angle.

  Request more information about this product
Induction Bi-Level Dimming Wall Pack Full Cut-Off Type Fixture from Neptun Light

Neptun's 18" Induction Full Cut-Off Wall Pack fixtures feature classic form and durability to make it an excellent choice for new construction or retrofit applications. Neptun's Induction Wall Pack fixtures feature a high CRI and bright white 5000°K color temperature for increased safety and security. The full cut-off wall packs are suitable for dark sky applications. The bi-level dimming system allows for increased energy savings during no traffic operation. It can replace existing HID fixtures of up to 250W.

  Request more information about this product
All Weather Wet Listed Linear T5 and T8 from Bartco Lighting

Bartco Lighting has just introduced the All Weather™ line of I.P.65 rated, wet listed, linear T5 and T8 fluorescent fixtures. The specification grade All Weather™ line is available in T5 and T8 as a single lamp fixture, a two-lamp fixture, and a staggered fixture for wet location runs. These are available in 14W, 21W, 28W or 35W linear fluorescent T5 or 17W, 25W, 32W, or 40W linear T8 lamps.

  Request more information about this product
New Dark Sky Fixtures from TLI

TLI introduces 2 new DARK SKY fixtures with an architectural look but with a budget friendly price. The EDGEBROOK is the ideal wet location fixture for covered walk ways when mounted to the ceiling. Only 4” deep and 13” wide. Two 26w quads can fulfill foot candle requirements for schools and shopping centers. The TRITON is a triangular wet location wall sconce that is 12”wide and 12” deep. An array of lamping options for outdoor use. 100w MH or a single 42w CF with an integral embattery option. Light entrances, columns, or architectural details or features on a building. These are just a few Dark Sky fixture offering from TLI.

  Request more information about this product
WAC Lighting Introduces Tube LED Luminaire

WAC Lighting is proud to introduce Tube, a new indoor and outdoor LED sconce luminaire. Precise engineering, superior optics and the latest LED technology are integrated in this highly efficient wall sconce. With its sleek cylindrical profile, Tube functions perfectly as an accent, wall wash or pathway light. Tube’s Dark Sky Friendly design prevents light pollution from spill around or up from the luminaire. The LEDs directional light source preserves star filled nights for astronomical observation, a feature not attainable with incandescent light sources that provide light in all directions. Constructed of aluminum with an etched glass lens, Tube is engineered with an integral driver and replaceable LED modules. Wet listed for outdoor applications, Tube uses a threaded cap and rubber gaskets to provide a watertight seal.

  Request more information about this product
Classic Saturn Wall from Teka

The Classic Saturn Wall from TEKA Illumination utilizes a GU24 self ballasted 2 pin twist and lock compact fluorescent lamp with a contemporary styed 10” diameter disc. The fixture is constructed from copper, bronze and stainless steel with tamper resistant, stainless steel hardware. A 5 ¼” diameter canopy conceal mounting plate hardware over a 4” octagonal junction box (by others) and is hand spun from high purity coppy plate. A high temperature silicone ‘O’ ring provides a water tight seal on body to shade assembly.

  Request more information about this product
The CVP Series from Rig-A-Lite

The CVP series non-metallic luminaire is commonly used on offshore drilling and production rigs, waste water treatment plants, elevator pits, refineries, industrial manufacturing, food processing, government facilities, schools, hospitals and other areas where protection from gasses or salt water are needed. The BVP is available in hazardous location rated or marine only rated with incandescent or compact fluorescent lamping and with colored globes for specialty applications (not available in CVPH). • Class I, Division 2, Group A,B,C & D • Zone 2, Group IIA, IIB & IIC

  Request more information about this product
Flex from AAL

Flex™ features arm designs and mounting options, including single, twin, tri shape and quad, form a versatile “create it yourself” look.

  Request more information about this product
The QCR from Precision-Paragon [P2]

The QCR Energy Efficient LED Gas Canopy Luminaire is designed to replace MH400 and PS320 lights with 150 Watts of LED lighting. The QCR has the features fuel-retailers want including high color rendering, no color shift, excellent uniformity and low energy and maintenance costs. Plus, its small footprint makes the QCR a drop-in replacement for many existing MH400 and PS320 fixtures.

  Request more information about this product
Energy Efficient Fixtures from Delray Lighting Offer a Variety of Mounting Options and Finishes

Delray Lighting's Cylinders series feature seamless extruded aluminum housings, available in brushed metal, silver, bronze, white, black, and custom color powder coat finishes. They are available in ceiling, pendant, and wall mount styles. The electronic ballasts are mounted in the canopy for easy access. Dimming and emergency power are available for some models. U.L. listed for damp locations, a convex lens option is available for some models, which allows installation in wet locations.

  Request more information about this product
227 Series Luminaires from Cree

227 Series recessed and low-profile surface-mount luminaires are a sustainable high-performance lighting solution designed for multipurpose use in exterior and interior spaces such as petroleum station canopies, drive-thru banks and restaurants. The flexible 30- to 120-LED configurations allow for increased visibility and safety below canopies and around building perimeters. The 90- and 120-LED luminaires are ideal for areas requiring high illuminance levels.

• UL listed and wet listed for covered ceiling applications

• Easy to mount from below or above the canopy deck

• Low-profile modular design for a clean appearance

  Request more information about this product
The new LED XLPG fixture from LSI Industries

LSI Industries has taken parking garage lighting to a whole new level with its new LED XLPG fixture. Specially designed to meet the needs of the parking garage space, LSI’s XLPG is purpose built to deliver optimum performance using significantly less energy as compared to traditional light sources. Energy-efficient LEDs combined with uniquely designed precision optics optimize light output for uniform illumination without any 'cave effect' or glare. Further, the XLPG has a number of features to ensure easy installation and virtually no maintenance, making it an affordable value and the LED solution of choice for new construction and retrofit parking garage applications.

  Request more information about this product
The Guardian from TLI

One fixture does it all. The GUARDIAN. 4 sizes. 15 decorative options. TLI offers the perfect compact/linear fluorescent fixture that fits into any area that needs an architectural appeal. The budget friendly, GUARDIAN, is a decorative die-cast wall sconce that is ADA compliant and rated for wet locations. The GUARDIAN fixture has scalability with its 18”, 2’, 3’, 4’ lengths. The DR/acrylic lens gives it the vandal resistant feature needed for high abuse areas. Choose from a total of 15 decorative fascia and trim designs that can give you the specific look needed, for any size. Great for site lighting, entrances, walk ways, and halls.

  Request more information about this product
HMAO LED from Holophane

As the first to develop high mast lighting systems over four decades ago, Holophane now also has the first reliable high mast LED systems. The innovative Holophane HMAO™ LED uses a modular chip design to provide up to 25 years of operating life and up to 74% energy savings over traditional HID products. HMAO LED offers the flexibility of three lumen packages in both an asymmetric and symmetrical distribution, providing customer choices on light levels and energy savings. Don't risk your LED investment with any company other than the one with the longest heritage of revolutionary innovation in high mast lighting... Holophane.

  Request more information about this product
Lumenbeam Large RGB from Lumenpulse

The Lumenbeam™ Large RGB is perfect for floodlighting applications in both exterior and large public interior spaces. It is available with a choice of 5 different optics and various mounting options. DMX 512 ready, the Lumenbeam™ Large RGB is a line voltage luminaire for 120 to 277 volts. It uses only 50 watts, and offers unmatched photometric performance. Designed to ensure sustainability by enabling simple maintenance and component replacement without having to replace the luminaire, the Lumenpulse™ standard 5 year warranty is included, and covers the complete Lumenbeam™ Large RGB assembly.

  Request more information about this product
Denali Series PC Solid State BKSSL

The Denali Series™ floodlight is a powerful, innovative solid-state lighting fixture designed to deliver higher lumen output and unprecedented color consistency. Incorporating power of ‘X’ BKSSL™ technology utilizing Patented “Color Corrected Cold Phosphor”, Denali delivers near-perfect natural white light while maintaining ‘lifetime’ color consistency. Now with dimming driver options for use with standard incandescent dimmers. Power Canopy may be wall or ceiling mounted and is wet location listed. Permits water tight installation with two wire entrance knockouts for 1/2” conduit or Romex connectors.

  Request more information about this product
Phantom from Modern Forms

ADA compliant, low profile design, Wet location listed, BZ - Aluminum construction, SS - 316 marine grade, stainless steel construction, Mitered white silk screened glass, Integral transformer in canopy, Dimming with electronic low voltage (ELV) dimmer, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
Urban from Modern Forms

ADA compliant, low profile design, Wet location listed, Dark Sky friendly, Interior light and downlight,  Aluminum construction, Dimming with electronic low voltage (ELV) dimmer, Requires Transformer to be recessed within the junction box, Replaceable LED module, 50,000 hour potential life, Color Temp: 3000K, CRI: 85

  Request more information about this product
After checking the desired product boxes above, please fill out the form below and click submit. Your product information request will be processed.
Please Note: We can only process requests sent from within North America.
Name :
Company Name :
Job Title :
Address :
City :
State :
Country :
ZIP :
Phone :
E-Mail :
  Please enter the verification code in the box below
Verification Code :  
 
Indoor Lighting  |   Outdoor Lighting  |   Green Lighting  |   Ballast/Transformers  |   Controls  |   Lamps/LED  |   Emergency/Exit  |   Manufacturers  |   Lighting Products  |   Events  |   Jobs  |   Industry News  |   New Catalogs  |   Buy Lighting Online  |   Site Map  |   Advertising Information
LIGHTDIRECTORY - LightDirectory.com, P.O. Box 331, Bristol, IL 60512.